EKO - BAIO Multi effects pedal

The BAIO (Box All In One) by Eko Guitars is a complete portable multi-effects pedal, perfect for your guitar. With its 9 built-in preamp types, 8 IRs and integrated effects, you will be able to fully control your sound. Try it as an audio interface with your pc or smartphone and use the BT to play along with your backing tracks.

Featuring 16cm in length, just 6cm in width and 260g in weight, BAIO is the all-in-one multi-effect system capable of offering all the features and functions essential to the modern guitarist. Easy to carry and super resistant thanks to its metal chassis, it allows total control of your sound.

EKO BAIO MULTI-EFFECT PEDAL WITH INTEGRATED IR - OVERVIEW

With nine selectable preamp types, controllable with the Tone and Drive knobs, you will have access to just as many timbres ranging from crystal clear to heavier distortions. The Modulation section, accessible via the Mod knob, allows you to add Chorus and Phaser; Delay effect with relative management of Delay Time, feedback, Mix and Reverb effect are accessible respectively with the Delay, FB, Mix and Rev knobs. The IR knob allows you to select from eight Impulse Responses specifically created for BAIO by Massimo Varini, who has selected and adapted some of the best ChopTones IRs. From Blues to Metal you will have the opportunity to use live and in the studio a selection of amplifiers, cabinets, speakers and microphones specially combined to offer a realistic convincing sound. Through the Out control you will be able to adjust the Output Volume and using the three footswitches you can switch from Preset Mode - for changing the Presets - to Live Mode, where you could set IRs / Rev, Delay / Mod and Preamp separately. With the footswitches, you can also activate the Bluetooth that will allow you to play your favorite backing tracks through an external device or activate the integrated Tuner, with which it is also possible to completely interrupt the Output signal (Mute function).

EKO BAIO MULTI-EFFECT PEDAL WITH INTEGRATED IR - CONNECTIONS

The rear panel features two standard jack sockets for input and output, an ON/OFF switch, a USB port for powering the pedal and charging the battery, a computer connection for use BAIO as an audio interface and uploading new IRs. Through the Phone input, you can connect your smartphone to the pedal using the supplied cable and use BAIO as an audio interface on your smartphone as well. There is also a Headphone output that will allow you to listen to the instrument signal and any Bluetooth playback at the same time.

EKO BAIO SOFTWARE

The Eko BAIO Software, in versions for PC and Mac, allows you to manage all the functions available to BAIO: it is possible to load and save external IRs in the 8 available slots; edit the 3 presets by modifying each parameter (gain, tone, effects, ir ...) and save the changes in the 3 available PRESETS; restore both the IRs and the factory presets.

MAIN FEATURES

• 9 preamp types with Tone and Gain control
• 8 IRs (Impulse Response) for as many amplifiers, selected and adapted to the BAIO by Massimo Varini and made by ChopTones
• 2 Modulation Effects (Chorus & Phase Shift)
• 1 Reverb Effect
• 1 adjustable Delay (Tape) - Mix, Delay Time, and Feedback
• Live / Preset function (3 storable presets)
• Built-in Tuner with Mute function

ADDITIONAL FUNCTIONS

• Built-in rechargeable batteries, USB charging, designed to simultaneously perform and recharge
• BAIO operates as an audio interface when connected to a computer via USB
• BAIO works as an audio interface when connected to a smartphone
• Bluetooth function (input) allows you to play backing tracks from any BT device
• You can easily load other IRs via software

SPECIFICATIONS

Input: 1/4" Standard TS (Mono) Jack
Output: 1/4" Standard TS (Mono) Jack
Sample Rate: 48kHz
Bit Depth: 24 bit
Battery Capacity: 600 mAh
Battery life: 6h of continuous use (approximately)
Dimensions: 162mm Length, 61mm Width, 23mm Depth
Weight: 260g