Guitar Amp Footswitches & A/B Boxes
Take hands-free control of your amplifier channels, reverb, and effects loops. Our curated collection of foot switches represents the ultimate destination for gigging guitarists, touring musicians, and home practice players—where rugged road-ready construction meets seamless compatibility. Whether you are looking for a highly reliable amplifier foot switch to toggle your clean and dirty channels or a specialized guitar foot switch to control your digital modeling parameters, we offer an exceptional range. Find your perfect utility with hand-selected latching foot switch and momentary foot switch models from industry-leading brands like Marshall, Fender, Orange, and Vox.
Because your performance relies on rock-solid gear, every single foot switch we sell undergoes a rigorous quality inspection and safety check by our expert techs in our Huntingdon showroom before shipping, ensuring flawless, noise-free performance straight out of the box.
✓ Rugged Road-Ready Construction ✓ Free UK Delivery over £99 ✓ Professional Tech Support Included
Explore Guitar Amp Footswitches & A/B Boxes at MusicStreet
Blackstar Guitar Amp - Live Logic Midi Controller
Blackstar FS-18 2 Button Latching footswitch
Blackstar FS-11 ID Core foot controller
Blackstar FS-10 footswitch
LEHLE-3AT1-SGOS
LEHLE-DUAL-SGOS
Marshall PEDL-91009
Marshall PEDL-91006
Marshall PEDL-90012
Marshall PEDL-90011
Understanding Foot Switch Technology: Latching vs. Momentary
When choosing a guitar foot switch, understanding the electrical behavior of the switch is critical for compatibility. Foot switches generally fall into two primary categories:
A latching foot switch (or latching switch) acts like a standard light switch. When you step on it, it clicks and locks into the "on" position, remaining there until you step on it again to turn it "off." This is the standard technology used for switching amplifier channels (e.g., clean to overdrive) or toggling built-in effects like reverb and tremolo.
A momentary foot switch (or momentary switch) only remains active while your foot is physically holding the switch down. The moment you release pressure, the switch returns to its default state. This behavior is essential for tap-tempo functions, holding sustain, triggering freeze effects, or executing momentary mutes. Using the wrong type of switch can cause your amplifier or pedal to behave erratically, so verifying your gear's requirements is essential.
🔧 Rigorous Inspection
Every foot switch is thoroughly tested, jack-cleaned, and continuity-checked by our in-house technicians before being listed for sale.
🛡️ 12-Month Warranty
We stand behind every product we sell. All of our switches come with a full 12-month warranty, giving you complete peace of mind with your purchase.
🚚 Free UK Delivery & 14-Day Returns
Get free, fully insured UK shipping on all orders over £99. If the switch isn't the perfect fit for your board, return it to us within 14 days for a hassle-free refund or exchange.
Brand-Specific Compatibility & Pedalboard Utilities
While some universal switches work across multiple brands, many modern multi-channel amplifiers require dedicated, proprietary controllers to handle complex switching matrices. We are proud to stock authentic, brand-specific options tailored to the industry's leading amplifier manufacturers:
Marshall Footswitches
From simple single-button channel switchers to advanced multi-button programmable controllers for the JVM series, a genuine Marshall footswitch ensures perfect communication with your British valve head.
Fender Footswitches
Whether you need a vintage-style two-button switch for a Princeton Reverb's vibrato and reverb, or a modern multi-button controller for the Mustang series, we stock authentic Fender footswitch options.
Orange & Vox Footswitches
Built like a tank with heavy-duty steel chassis, a genuine Orange footswitch delivers reliable, latching control over your Rockerverb or Crush amplifier's channels and reverb. Designed to match the classic AC series, a genuine Vox footswitch provides robust, reliable control over your Top Boost channels and built-in tremolo circuits. Explore our used range in our Pre-Owned Collection or view our parent Electric Guitars collection.
Guitar Trade-In & Part-Exchange Program
Ready to upgrade your current setup? We make it incredibly easy to trade in your pre-owned gear. Through our straightforward guitar part-exchange program, you can bring your old guitar, amplifier, or effects pedals into our showroom (or send us details online) and put its value directly toward any new or used gear in our store.
Visit Our Huntingdon Guitar Showroom
If you are searching for premium guitar shops in Cambridgeshire, come visit our showroom in Huntingdon. Located at 10 Chequers Court, our showroom features a dedicated electric guitar and amplifier room where you can sit back, play, and compare different neck profiles, scale lengths, and pickup configurations side-by-side. We are easily accessible from Cambridge, Peterborough, and Bedford, with convenient parking nearby.
Frequently Asked Questions About Foot Switches
What is the difference between a latching and a momentary foot switch? +
A latching foot switch clicks and locks into position when pressed, staying "on" until you press it again (ideal for channel switching or turning reverb on/off). A momentary foot switch only stays active while you are physically holding it down with your foot, returning to "off" the moment you let go (essential for tap-tempo, sustain, or momentary effects).
Can I use any brand of footswitch with my amplifier? +
Not always. While simple single-button latching switches often use a universal 1/4-inch jack and can be interchangeable, many multi-button amplifiers utilize proprietary wiring, specific resistance values, or digital communication protocols. To ensure 100% compatibility and prevent damage to your amplifier's switching matrix, we always recommend using a dedicated, brand-specific controller (such as a genuine Marshall footswitch or Fender footswitch).
Do these foot switches require external power or batteries? +
Most standard analog foot switches (single or dual-button latching/momentary switches) do not require any external power or batteries. They operate as simple passive contact closures, drawing the tiny amount of voltage they need directly from the amplifier's foot switch jack. However, some advanced digital or programmable MIDI foot controllers with LED screens or complex logic circuits may require an external power supply.
Do you inspect and test used foot switches? +
Yes, absolutely! Every single pre-owned and used foot switch that comes through our shop undergoes a rigorous multi-point technical inspection and play-test by our in-house technicians. We clean all jacks, test the switches for continuity and reliable latching/momentary action, and verify the chassis integrity. We back all used gear with our full 12-month warranty.
The Importance of a Reliable Foot Switch: Seamless Stage Control
What separates a clunky, awkward live performance from a seamless, professional stage show? While your guitar and amplifier define your core tone, professional touring guitarists and gigging musicians know that the secret to a flawless performance lies in the ability to control your gear hands-free.
A premium amplifier foot switch serves several critical functions on stage:
- Instant Channel Switching: Toggle instantly between your amplifier's sparkling clean channel and grinding overdrive channel without taking your hands off your guitar.
- Effects Loop & Reverb Bypass: Turn your amplifier's built-in spring reverb, tremolo, or effects loop on and off cleanly during specific song sections.
- Digital Modeling Control: Trigger loopers, tap tempo, or scroll through presets on modern digital modeling amplifiers.
Understanding Foot Switch Technology: Latching vs. Momentary
To choose the correct foot switch for your amplifier or pedalboard, you must understand the two primary switching technologies:
- Latching Foot Switches: A latching switch (often called a "toggle" switch) changes its state and stays there when pressed. For example, pressing a latching foot switch once turns your amplifier's overdrive channel ON, and it remains ON until you press the switch a second time to turn it OFF. This is the industry standard for channel switching and effects bypass.
- Momentary Foot Switches: A momentary switch only remains active while your foot is physically holding the switch down. The moment you release your foot, the switch returns to its default state. This technology is used for tap tempo, triggering sustain, or scrolling through digital presets.
Explore the Foot Switch Lineup
1. Brand-Specific Footswitches (The OEM Standards)
Designed specifically to interface flawlessly with your exact amplifier model. We stock a comprehensive range of original equipment manufacturer (OEM) footswitches, including the classic Marshall footswitch (from simple 1-button channel switchers to advanced multi-button JVM controllers), Fender footswitch models (including vintage-style chrome buttons for Deluxe and Princeton Reverbs), and rugged Orange footswitch and Vox footswitch units.
2. Universal & Multi-Button Footswitches (The Pedalboard Utilities)
For players who demand maximum flexibility in a compact footprint. Universal multi-button footswitches allow you to control multiple functions (such as channel switching and reverb bypass) through a single TRS cable, saving valuable space on your pedalboard.
4. The MusicStreet Difference: Workshop-Prepared Reliability
At MusicStreet, we don't believe in "box shifting." A foot switch is a mechanical device subjected to heavy physical use, and its reliability is critical to your performance.
Every single foot switch that leaves our Huntingdon showroom undergoes a rigorous quality inspection and safety check by our expert techs. We verify all input and output jacks, test the mechanical sweep and tension, check the switches for noise-free operation, and ensure the unit performs flawlessly.
- No Drop-Shipping: Every foot switch listed on our site is physically in stock at our Huntingdon store.
- 1-Year Warranty: We back every instrument, amplifier, and accessory we sell with a comprehensive 1-year warranty.
- Free UK Shipping: Enjoy free, fully insured UK shipping on all orders over £99, with competitive rates worldwide.
- Flexible Financing: Buy with confidence using Klarna or PayPal split payments.
5. Frequently Asked Questions (FAQs)
What is the difference between a latching and momentary foot switch?
A latching switch changes its state and stays there when pressed (e.g., turning a channel ON until pressed again). A momentary switch is only active while your foot is physically holding it down (e.g., tap tempo or sustain).
Can I use a Marshall footswitch with a Fender amplifier?
It depends on the specific switching circuitry. While simple 1-button latching footswitches are often interchangeable, multi-button and digital footswitches utilize proprietary wiring and are not compatible across different brands. Always verify compatibility before purchasing.
Does my foot switch come tested?
Yes. Every foot switch purchased from MusicStreet receives a professional, custom inspection and safety check in our in-house workshop before dispatch to ensure it runs quietly and performs flawlessly.
Can I try these footswitches in person?
Absolutely. We welcome you to visit our independent showroom at 10 Chequers Court, Huntingdon, Cambridgeshire. You can bring your own amplifier, plug into our test footswitches, and get honest, expert advice from our team of working musicians.
